| |
Details
 VIDEO
DTE500
- 8,03 Mb. -
|
|
Volumetric Dosign Unit :
High precision and easy-to-use dosing machine for accurate filling of all types of glass and plastic containers.
All the parts in direct contact with product are in AISI 316 steel, with PTFE gasket. Therefore, this dosing machines are particularly suitable in the food industry for filling semi-dense and thick products, like patés, sauces, creams etc.
This equipment may be successfully employed in the cosmetics and chemical industry, for filling shampoos, detergents, paints, chemicals, etc.
a
Thanks to their careful design and top quality construction, these machines are ideal for continuous operations.
Technical specifications for Volumetric Dosing Unit:
• The amount of the product to be filled is easily and quickly selected.
• Specially designed filling nozzles to ensure against product spillage.
• Pressure, filling and suction rate can be easily adjusted.
• Filling cycle start by pedal control
• Different types of valves are available depending on product density and specifications
• All valves are fitted with tri-clamp connections, making them fully and easily removable and interchanged, to use the same machine for different products. They are also easy to clean and sanitize.
• Terminal nozzles (all stainless steel made) are available in different models
and sizes depending on the type of product to be filled and internal container diameter.
Dimensions: 270 x 700 x 200h mm
Filling volume: from 10 to 5.000 cc.
Supply: compressed air Materials: stainless steel AISI 316 - PTFE
Capping Station for Twist-off Caps :
This capping machine is used for closing 'twist-off' caps.
The operator places the cap into the capping head and the jar in its proper holding-plate. When the start-up side buttons are pressed with both hands, the plate will raise up to the head, to close the cap in just a few seconds.
Technical specifications for Capping Station:
• Pneumatic operation
• Height adjustment to fit different jar heights
• Torque adjustment of the closing head * Double side start button system
• Capping head magnetic type, totally stainless steel made
Labelling Unit for Self-Adhesive Labels :
Semi-automatic bench type labeller ET500 for application of self-adhesive labels Machine frame made in AISI 304 stainless steel. It may labels bottles, jars, cans of different sizes.
Technical specifications for Labelling Unit :
• Control of the working cycle by micro-processor ( PLC Télémécanique brand )
• Label start by pushbutton
• Possibility of application of front + back labels
• Labelling unit designed for application of wrap-around labels on bottles and jars
Technical specifications for Monoblock DTE500 :
• Machine complying with EEC regulations.
• Supply: electric power and compressed air.
• Standard voltage : V220-1ph-50hz
Output : approx 500-700 jars/hour (depending on the product specifications and the jar size)
Weight: Kg. 150
Heigth: 1700 mm.
Width: 1600 mm.
Depth: 600 mm.
Power required : 220 V
Compressed air supply : 6 Bar
In alternative you can require the machine without labeller
|
|
)
)
)
)
)
)
