Beverage Machines   Food Machines Advice Info
    
    
 
             
  SEMI-AUTOMATIC RINSING MACHINE - SC1000
Rinsing Machine SC 1000
  
 

The machine is designed to rinse the inside of new bottles, before the filling operation, without dripping on the outside.

The water has to be pre-filtered, on demand we may supply a filtering cartridge 0,45 µm.

  
 

  Technical Specifications :  
 
Rinsing machine Rinsing machine

Details

 

 Working cycle :

  • The operator places by hand the first 4 bottles upside down inside the plastic cups on the top of the machine.

  • Then he presses the green start button, to open the valves.

  • The water is automatically injected to remove any particle inside the bottles efficiently and quickly.

  • While the first 4 bottles are dripping after rinsing, the operator may place other 4 bottles on the remaining 4 cups.

  • The injection time is adjustable by means of a timer located in the machine control panel.

  • Each section of 4 bottle-holders has its own timer, to adjust the rinsing timing separately.

  • The water dripping out is canalized into a discharge pipe.


Technical Specifications :
  • Mainframe totally in aisi 304 stainless steel and plastic materials approved for this specific use.
  • Rinsing jet controlled by solenoid valves, with sensor detecting the bottle presence ( 'no bottle - no rinse')
  • The rinsing nozzle has a special design to spray the water efficiently on all the bottle surface
  • Filtering unit for the water on demand
  • Sizes: 1000mm X 400mm X H 500mm +/-100 - Weight Kg. 50
  • Standard Voltage: V220 - single-phase - 50hz.
  • Installed Power: 0,18 kW
  • Bottle diamenter : min. 60 - max. 115 mm
  • Bottle height : min. 240 - max. 370 mm
  • Output : depending on the operator, estimated 600-800 b.p.h.
  

  info durfo Request info on this product >>